51HC85 Monitor, 116 Service Codes !

[Steve Giannoni]

Putting my new 51HC85 into "Service Mode", I then discover no less than 116 codes, each assigned a 2 digit Hexadecimal level (0 to 255). Carefully recorded each, in case I ever needed to return to initial values. Somone posted a reduced list. Would really like to see all 116 defined. Some background re adjustments would be really great. I know some are definitely not optimal. The green is too low at 0 to med. light levels; these pictures have a slight magenta tinge, and a "darkened" scene is definitely magenta instead of very dark gray. Informed comments most welcome & thanks ....

[gopher12]

Not sure if your sets service mode is like the previous years models but that magenta or reddish background on dark scenes was an issue for some owners including myself here and on other boards, most were able to reduce that *red push* by lowering the RCUT value a few clicks.

take it easy

[ericpd]

Steve, exactly how did you get into Service Mode? I followed the instructions listed in one other thread as well as the instructions at one of the links that was offered up, but I just can't the 57HC85 to get there. I'm sitting on a red problem as well!

[zoombie]

Oh, most of you guys having too much red problem, am i the only having too much green problem?

i have greenish on dark scenes

[gopher12]

Zoombie maybe try reducing GCut a few clicks and see if that helps

[zoombie]

thanks for let me know goper12,
one more thing i want to ask: is it reasonable to have green-push (greenish on dark scen) when the value of RCUT is to high ?

This is from my record

RCUT = 9FH
BCUT = 84H
GCUT = 80H
BDRV (blue drive) = 39H
RDRV (red drive) = 29H