gbdallas22
02-20-2005, 01:52 PM
Hi i am new to this great forum can anybody help me i what in the service menu and did a no no. the picture is red now so what can i do to fix it does anybody have the stock numbers
 |
|
|||||||||||||
View Full Version : need help on 65h84
Splicer
02-20-2005, 01:59 PM
All TV's are different. On my 51H83, as far as red is considered, is as follows:
RCUT - 91H
RDRV - 41H
That should get you in the ball park. However WRITE EVERY VALUE DOWN BEFORE YOU START CHANGING THINGS, or you get in a mess like this. Good luck.
RCUT - 91H
RDRV - 41H
That should get you in the ball park. However WRITE EVERY VALUE DOWN BEFORE YOU START CHANGING THINGS, or you get in a mess like this. Good luck.
gbdallas22
02-20-2005, 02:17 PM
i change some more but i don`t no what i did so if somebody can copy the setting on your tv that would be great
Splicer
02-20-2005, 02:38 PM
All right. Here is the LOOOOOOOOOOOOOOOOOOOOOOOONG list (yu already have the RED #'s):
GCUT-80H
BCUT-72H
BDRV-53H
BRTC78H
TNTC-48H
SCOL-50H
SCNT-0CH
HIT-35H
VLIN-13H
VSC-29H
VCP-05H
WID-4EH
PARA10H
CNR-10H
HCP-00H
VFC-00H
BBOF-00H
BYOF00H
AROF-00H
ABOF-00H
AYOF-00H
VPSI-77H
BCNR-10H
TCNR-10H
CSAW-08H
CPAR-08H
DFV-08H
HSC-10H
TRAP-40H
VPS2-40H
BROF-00H
OPT1-00H
OPT2-84H
TVOP-58H
Don't forget, these are factory settings for a 51H83. I would pressume a 65"H84 would be different. Good luck and remember to write your factory #'s down when you go in the service menu.
GCUT-80H
BCUT-72H
BDRV-53H
BRTC78H
TNTC-48H
SCOL-50H
SCNT-0CH
HIT-35H
VLIN-13H
VSC-29H
VCP-05H
WID-4EH
PARA10H
CNR-10H
HCP-00H
VFC-00H
BBOF-00H
BYOF00H
AROF-00H
ABOF-00H
AYOF-00H
VPSI-77H
BCNR-10H
TCNR-10H
CSAW-08H
CPAR-08H
DFV-08H
HSC-10H
TRAP-40H
VPS2-40H
BROF-00H
OPT1-00H
OPT2-84H
TVOP-58H
Don't forget, these are factory settings for a 51H83. I would pressume a 65"H84 would be different. Good luck and remember to write your factory #'s down when you go in the service menu.
57U
02-20-2005, 02:42 PM
Remember that there are no "factory" numbers. Each TV is set up individually. Some of the numbers supplied above may be fine and some of them may be "in the ballpark". For example, my horizontal postition number was significantly different from that indicated in the service manual, as were several other numbers.
I'd suggest you only change numbers that affect the colour and leave others alone, or make note of them at least.
I'd suggest you only change numbers that affect the colour and leave others alone, or make note of them at least.
gbdallas22
02-20-2005, 02:56 PM
thank you for all your help i will let you no if it work
gbdallas22
02-20-2005, 04:25 PM
yes it work thank you for all the help
Splicer
02-20-2005, 04:53 PM
Good Deal! :rockon:
